The upcoming OpenWrt 24.00 release includes a new ( thermald ). This will allow the W1700K to dynamically throttle only when hitting 80°C, rather than the crude "all or nothing" system currently used. Early builds show a 20% improvement in thermal efficiency.
The installation process for OpenWRT on W1700K is relatively straightforward, but it does require some technical expertise. Here are the steps to follow: w1700k openwrt hot
6GHz support in the US may be restricted or require specific patches. Connectivity Dual 10GbE ports for ultra-fast networking. 10GbE driver support is still a work-in-progress. Wi-Fi 7 Extremely low latency and high multi-gigabit speeds. Requires WPA3 and specific patches for 6GHz. Customization Full control over a previously "locked" managed device. High barrier to entry (requires serial rooting/flashing). The upcoming OpenWrt 24
: VCC (3.3V) — Do NOT connect this if your adapter uses 5V, as it will damage the board. The installation process for OpenWRT on W1700K is
: You must open the case to access the TTL serial console pins located at the bottom left of the board.