It was 5:30 AM. He had done in two hours what usually took two days.
A manufacturer in Chengdu reported a 30% reduction in cycle time when programming a titanium blisk (integral rotor). SurfMill 9.5's "Blade Flank" strategy allowed the 5mm ball nose to maintain contact near the root without gouging the hub fillet. surfmill 9.5
Since "SurfMill 9.5" most likely refers to the JDSoft SurfMill It was 5:30 AM
Do not use a standard zig-zag raster. Use a with a stepover of 67% of the tool diameter. This leverages the wiper flats on the inserts. For a 25mm Surfmill 9.5: Stepover = 16.75mm, Feed = 3,000 mm/min. Feed = 3
module for automated footwear sole design and sizing (35 to 45). High Precision Path Generation