Lambert Lx 24 Fi Manual English Jun 2026

Users can select heating temperatures between 60∘C60 raised to the composed with power cap C 85∘C85 raised to the composed with power cap C , and hot water between 35∘C35 raised to the composed with power cap C 60∘C60 raised to the composed with power cap C

Dual heat exchanger system for simultaneous hot water and heating performance. 🛠️ Common Operations & Troubleshooting Lambert LX 24 Fi Kullanım | PDF - Scribd Lambert Lx 24 Fi Manual English

| Code | Meaning | User Action | |------|---------|--------------| | | Ignition failure (no flame after 3 attempts) | Press Reset. Check gas supply (other appliances working?). If persists, call engineer. | | E02 | Flame loss during operation | Reset boiler. Check flue terminal for wind or blockage. | | E03 | Low system water pressure | Repressurise to 1.5 bar (see section 4.4). | | E05 | Overheating (flow temp > 95°C) | Check radiator valves are open. Bleed air from system. | | E10 | Fan or flue pressure switch fault | Cannot be user-reset. Contact engineer. | | E34 | External sensor fault (if installed) | Call engineer. Boiler will run on default curve until fixed. | If persists, call engineer

The Lambert LX 24 FI is a single-engine, high-performance light aircraft featuring a fuel-injected Lycoming engine, advanced avionics, and a composite airframe designed for efficiency and pilot comfort. This feature presents a structured English manual-style guide covering specifications, cockpit layout, normal and emergency procedures, performance charts, maintenance tips, and safety notes. | | E03 | Low system water pressure | Repressurise to 1