: Speed and feed overrides can be dynamically disabled or locked via macro variables. If the override is disabled through a macro, the machine ignores the physical dial, which can lead to unpredictable speeds if the operator is not alerted by the "Override Active" status. Common Related Alarms
The most common root cause of the WN57 override activation is parameter corruption. Fanuc controls rely on SRAM (Static Random Access Memory) to store vital system parameters, macro variables, and pitch error compensation data. This memory is maintained by a battery backup when the machine is powered off. If the backup battery voltage drops below a critical threshold, or if the machine is left without power for an extended period, the SRAM data may become unstable or corrupt. fanuc wn57 override function is active
WN57 OVERRIDE FUNCTION IS ACTIVE message on a Fanuc CNC is a PMC (Programmable Machine Control) alarm indicating that the "Override" mode for the forced I/O function is currently enabled : Speed and feed overrides can be dynamically
The message "WN57 override function is active" indicates that one or more feedrate or spindle override functions are currently enabled on a FANUC CNC control. This is a status/notification describing that the machine will not run at the programmed nominal feed or spindle speed because operator overrides are modifying those values in real time. Fanuc controls rely on SRAM (Static Random Access
Suppose an operator is machining a part with a programmed feed rate of 100 mm/min. During machining, the operator notices that the tool is experiencing excessive wear due to the hardness of the material. To mitigate this, the operator activates the WN57 override function and reduces the feed rate to 80 mm/min (80% of the programmed value). This adjustment helps to reduce tool wear and extend tool life.
If you see this message and need to clear it, check the following: