The Cobra 3195 has an internal shock sensor (usually on the control module near the fuse box). The manual explains:
Complete User Guide for the Cobra 3195 Alarm System The is a modular car security system designed to provide comprehensive protection, including perimetric monitoring and ultrasonic interior detection. This guide synthesizes essential operations, programming steps, and troubleshooting tips from official documentation and technical support resources. Core Remote Functions cobra 3195 alarm manual full
ARM – Press ARM button (30‑s delay) DISARM – Enter PIN + ENTER MODE – Cycle OFF / HOME / AWAY SILENCE – Hold SILENCE 3 s (panic) TEST – Press TEST → select zone → ENTER MENU → SETUP – Adjust TIME/DATE, MOTION SENS, ARM DELAY MENU → USER – Add/DEL user (MASTER vs USER) MENU → COMM – GSM/Wi‑Fi config, test alerts MENU → SYS – FACTORY RESET, FIRMWARE UPDATE The Cobra 3195 has an internal shock sensor
| Mode | Description | When to Use | |------|-------------|------------| | | All sensors disabled; system idle. | Home, while you’re present. | | HOME | Perimeter sensors (doors/windows) active; interior motion sensors disabled . | You’re inside but want protection against burglary. | | AWAY | Both perimeter and interior motion sensors active. | You’re out of the house. | | Panic (triggered by holding SILENCE for 3 s) | Instant alarm, sends immediate alert. | Emergency (break‑in, medical). | Core Remote Functions ARM – Press ARM button
If the remote fails, you must use the unique 4-digit PIN code provided on the system's security card. Programming New Remote Fobs